Yoshitake manufactures valves that control fluid running through the piping.
Many of our valves use the force of the spring to actuate itself mechanically, and thus called the “self-actuated regulating valve.”
Due to this design, the valve requires no external energy, such as electricity, to operate itself.
They are energy-saving, eco-friendly products. Yoshitake’s valves, while they themselves may not be visible, play an indispensable part in our every life; they are used in machines and plants, buildings, public facilities, and more.
Yoshitake does not stop at manufacturing and sales of valves; based on why and where the valves are used, we propose the best solutions to our customers’ needs. Through the valve production, Yoshitake continues to help our customers pursue energy conservation, clean environment, safety, and high productivity.
Product from YOSHITAKE
Pressure reducing valve (Pressure reducing valve).
Valves, pressure reducing valve is used to reduce pressure in the sub-circuit. For example, the primary circuit pressure 200 bar dependent attributes using a small pressure 100 bar, we have to reduce the pressure from 200 bar to 100 bar to pay for this sub-circuit.
Safety and Relief Valve
Pressure Safety Value (safety valve) or Pressure Relief Valve (pressure relief valve) is equipped with a safety system. There is pressure within the system. Which will run automatically when the pressure exceeds a preset value. Both valves have a different type of user that is using Fluid Pressure Safety Value compressed. (Compressible Fluid), such as steam or gas, which require pressure relief quickly for Pressure Relief Valve is used with the sharpening of the compression is not (Non Compressible Fluid), such as water or oil, which will drain the pressure slowly. The valve contains two species are similar.
Solenoid Valve
Solenoid Valve is at the switch housing. The working principle of electromagnetic interaction mechanisms using the input power is required. Working to control valve mechanism to close or open.
Take a look at the types of solenoid valves commonly used.
3-way control valve, two position normally closed solenoid valve by sliding wide. The valve moves back by spring
Steam Trap
Steam traps (Steam Trap) is a type of valve. Special steam used to heat the steam system efficiency and reduce the cost of production of steam. The steam trap all kinds. There are three ways to work more key.
- Switch to drain condensate (Condensate)
- closed to prevent water leakage
- open for ventilation and non-condensable gases out.
Ventilation Air Vent Valve/b>
Air Vent has drained out of the system liquid or steam at the beginning of the operation.
For liquid air vent is a float. When the boot The air is vented out through the air vent on top Orifice out. The water level will be raised to close the hole Orifice floats on top for steam systems. If no ventilation valve may produce loud noise inside the pipe. The liquid or fluid with air line tubing.
Sight Glass
To see the flow of the process can take a look at the flow of the chemical. Flow of heat and steam.
Temperature Regulator
Air Force circuit of the heat is not too high a rate, air temperature.
Noiseless
Made from corrosion-resistant stainless. Reduce noise The simple problem